| 115V | 230V | |
| Scheme: ETA-EMI PSU |  |
| 115V | 230V | |
No LAMBDA levelAverage noise output 48.47 dB(A), above the 45 dB(A) limit of the lowest LAMBDA level (Standard). |
Scheme: LAMBDA PSU |
Outside Validation Scope
| Product Identification Details | |
| Brand | Thermaltake |
| Model | AX 3200W |
| OEM/ODM | CWT |
| Serial Number | PSTPA3200FNSAPE1YGCW00074 |
| Product Specifications | |
| Manufacturer-Provided Information | |
| Rated Voltage (Vrms) | 230-240 |
| Rated Current (Arms) | 16 |
| Rated Frequency (Hz) | 50-60 |
| Rated Power (W) | 3200 |
| Operating Temperature (Continuous Full Load) (°C) | 0 - 45 |
| Type | ATX12V |
| Cable Design | Fully Modular |
| Warranty | 10 years |
| Cybenetics Measurements | |
| Dimensions (W x H x D) | 150 x 86 x 200mm |
| Weight | 2.60 kg (5.73 lb) |
| Cooling | 140mm Double Ball Bearing Fan (TT-1425 ZFB142512E ABP3) |
| Semi-Passive Operation | ✗ |
| Cybenetics Testing Information | |
| Lab ID | TT32003410 |
| Date of receipt | Aug 24, 2026 |
| Testing Date | Sep 11, 2026 |
| Report Issued Date | Sep 16, 2026 |
| DUT Notes | We did not perform OCP and OPP protection testing at full rated capacity. All other ATX v3.x requirements were fully tested and met. We issued the ATX v3.x compliance badge on this basis; OCP/OPP thresholds at maximum rated load remain unverified due to equipment constraints, not a unit deficiency. The bundled AC power cord is a 1100mm 3G 1.0mm² type. IEC 60320-1 allows 1.0mm² conductors on a 16A cord set of up to 2m, so this cord meets the standard. With the unit drawing about 15.3A at full load through its 16A C20 inlet, however, it sits at the minimum the standard permits, and every sample we checked carries the same cord. A 1.5mm² cord set runs cooler at sustained full load, and any replacement longer than 2m must be 1.5mm². |
| Engineer Name | Ioannis Kalyviotis |
| Authorized By the Laboratory Technical Manager | Aristeidis Bitziopoulos |
| Signature | |
