CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
XPG Core Reactor II 850W
序号4N1680815250
Lab IDAD85002216
Certification ID252216
  • Test Result Report ID: 23PS2216A
  • Certificate Issue Date: Aug 25, 2023
115V230V
Scheme: ETA-EMI PSU
115V230V
Scheme: LAMBDA PSU
Outside Validation Scope
Aristeidis Bitziopoulos, Certification Body General Manager

General Information

Test Equipment

DUT Information(Non-accredited measurements)

线材与接头(Non-accredited measurements)

电源规范

Test Results

Temperature & Compliance Info

Performance Summary

保持时间 & PG信号

待机电源

Tables

Graphs

转换效率图表

Efficiency and power factor by load range

84858687888990919293Average efficiency (%)85.4390.4790.9890.0988.8786.6191.8592.8092.3391.570-<20 %20-<40 %40-<60 %60-<80 %80-100 %axis starts at 84115V230V
84858687888990919293Average efficiency (%)0-<20 %20-<40 %40-<60 %60-<80 %80-100 %axis starts at 84115V230V
0.820.840.860.880.900.920.940.960.981.00Average power factor0.9730.9920.9910.9940.9950.8550.9610.9790.9850.9880-<20 %20-<40 %40-<60 %60-<80 %80-100 %axis starts at 0.82115V230V
0.820.840.860.880.900.920.940.960.981.00Average power factor0-<20 %20-<40 %40-<60 %60-<80 %80-100 %axis starts at 0.82115V230V
Load rangePointsEfficiency
115V
Efficiency
230V
PF
115V
PF
230V
0-<20 %200 / 20085.43%86.61%0.9730.855
20-<40 %318 / 31890.47%91.85%0.9920.961
40-<60 %319 / 31990.98%92.80%0.9910.979
60-<80 %318 / 31890.09%92.33%0.9940.985
80-100 %326 / 32688.87%91.57%0.9950.988
70-100 % (High-Load)486 / 48689.18%91.76%0.9950.987
All (published average)1481 / 148189.46%91.39%0.9900.962

INFO

The average efficiency and power factor in five ranges of load. Calculated from the 1481 (115V) and 1481 (230V) load combinations of the certification sweep, the same data that ETA and LAMBDA use (test 0 excluded). Load is the total DC output as a share of the rated 850 W. These are plain averages of the valid readings, as for the ETA rating, so the ranges combined give back the published averages.

Informational. Not part of the ETA or LAMBDA rating.

噪音值图表

Noise by load range

High-Load Index (70-100 % load)
Noise 37.1 dB(A) at 115V and 34.6 dB(A) at 230V · loudest point 41.9 dB(A)
Efficiency 89.18% / 91.76% · power factor 0.995 / 0.987 (115V / 230V)
051015202530354045Average noise (dB(A))18.818.80-<20 %fan off 0%/0%18.818.820-<40 %fan off 0%/0%18.818.840-<60 %fan off 0%/0%28.025.060-<80 %fan off 0%/0%38.536.180-100 %fan off 0%/0%115V230V
010203040Average noise (dB(A))18.818.80-<20 %off 0%/0%18.818.820-<40 %off 0%/0%18.818.840-<60 %off 0%/0%28.025.060-<80 %off 0%/0%38.536.180-100 %off 0%/0%115V230V
Load rangeNoise 115V
avg (loudest)
Noise 230V
avg (loudest)
Fan off
115V / 230V
0-<20 %18.8 (18.8)18.8 (18.8)0% / 0%
20-<40 %18.8 (18.8)18.8 (18.8)0% / 0%
40-<60 %18.8 (18.8)18.8 (18.8)0% / 0%
60-<80 %28.0 (37.7)25.0 (34.9)0% / 0%
80-100 %38.5 (41.9)36.1 (40.0)0% / 0%
70-100 % (High-Load)37.1 (41.9)34.6 (40.0)0% / 0%
All (published average)32.4 (41.9)30.0 (40.0)0% / 0%

INFO

The average noise in five ranges of load, the share of points with the fan stopped (semi-passive operation), and the High-Load Index: the same figures for all points at 70 % of the rated output and above. Calculated from the 1481 (115V) and 1481 (230V) load combinations of the certification sweep, the same data that ETA and LAMBDA use (test 0 excluded). Load is the total DC output as a share of the rated 850 W. Noise is averaged on the energy scale, as for LAMBDA, so the ranges combined give back the published average noise. Each load combination is held for about five seconds; the stabilized readings at fixed loads are under "Noise under high ambient temperature".

Informational. Not part of the ETA or LAMBDA rating.

Noise under high ambient temperature (indicative)

115V

LoadNormal ambient
fan · noise · intake
High ambient
fan · noise · intake
Noise change
10%895 RPM · 20.6 dB(A) · 40.5 °C895 RPM · 20.6 dB(A) · 40.5 °C+0.0 dB(A)
20%900 RPM · 20.9 dB(A) · 40.7 °C900 RPM · 20.9 dB(A) · 40.7 °C+0.0 dB(A)
50%915 RPM · 21.5 dB(A) · 42.4 °C915 RPM · 21.5 dB(A) · 42.4 °C+0.0 dB(A)
100%2335 RPM · 48.8 dB(A) · 45.4 °C2335 RPM · 48.8 dB(A) · 45.4 °C+0.0 dB(A)

230V

LoadNormal ambient
fan · noise · intake
High ambient
fan · noise · intake
Noise change
10%896 RPM · 20.6 dB(A) · 40.4 °C896 RPM · 20.6 dB(A) · 40.4 °C+0.0 dB(A)
20%896 RPM · 20.6 dB(A) · 40.7 °C896 RPM · 20.6 dB(A) · 40.7 °C+0.0 dB(A)
50%907 RPM · 20.9 dB(A) · 42.6 °C907 RPM · 20.9 dB(A) · 42.6 °C+0.0 dB(A)
100%2323 RPM · 48.8 dB(A) · 45.7 °C2323 RPM · 48.8 dB(A) · 45.7 °C+0.0 dB(A)

INFO

Fan speed, noise and the measured intake temperature at 10, 20, 50 and 100 % load, from the two load regulation tests: at normal ambient (about 30-32 °C) and at high ambient (about 40-47 °C). These are stabilized readings at fixed loads, not averages over the certification sweep, so they are indicative of how the fan behaves when it is hot. "<6.0" is the floor of our sound meter: the fan is stopped or too quiet to measure (the fan speed column says which); with the fan stopped, the intake sensor can read higher than the chamber air.

Informational. Not part of the ETA or LAMBDA rating.

Conducted Emissions EN 55032 & CISPR 32

Indicative Performance

高环温电源转换效率

5Vsb转换效率

输入电压 时的5Vsb 效率 (ErP Lot3/6 & CEC)

Protection Features

Supplementary Tests (For Reference)

10-110%负载测试

20-80瓦负载测试

纹波测量

XPG Core Reactor II 850W

Top side
Top side
Power specifications label
Power specifications label
本测试报告中包含的所有数据和图表均可在以下条件下由任何人使用:使用过程需提及测试结果由Cybenetics提供。
在任何情况下都应提供原始测试结果文档的网站链接
Cybenetics 提供自愿性认证计划:电源方面有 ETA(效率)、LAMBDA(噪声)与 SAFE(安全与正确运行);散热产品方面有 DELTA(机箱隔音)与 PHI(风扇风量与静压)
CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus